RC Plane Hub Logo
RC PLANE HUBAeromodelling Kits
Home/Training Academy
Aeromodelling Flight School

Rc Plane Hub Flight Academy

Master the art of RC aviation step-by-step.

01
Level 1

Ground Control & Pre-Flight Verification

15 Mins

Essential safety routines, battery voltage checks, CG balancing, and radio range testing.

Transmitter power sequence (Radio ON first, then connect battery)
Control surface direction check (Aileron, Elevator, Rudder)
Finding center of gravity at 65mm from wing leading edge
Assessing wind speed (< 12 mph recommended for first flights)
02
Level 2

First Takeoff & Trim Control

20 Mins

Hand-launch vs ground takeoff, smooth throttle ramp up, and setting flight trims.

Hand launching directly into the wind at 75% throttle
Smooth climb out at 15-degree pitch angle
Trimming elevator for level cruise at 50% throttle
Understanding airspeed vs stall threshold
03
Level 3

Basic Flying Patterns & Orientation

25 Mins

Flying the 'Figure 8' pattern, handling head-on orientation, and altitude control.

Gentle coordinated turns with rudder and aileron
Maintaining constant 100 ft altitude during banking turns
Overcoming reverse control instinct when flying towards yourself
Utilizing the 1-Click Panic Switch when disoriented
04
Level 4

Approach & Touchdown Precision

30 Mins

Setting up the final landing pattern, throttling down, flare mechanics, and grass rollouts.

Downwind, base, and final approach legs
Throttling back to 25% for a steady glide slope
Gentle elevator flare 1 foot above runway surface
Crosswind landing compensation techniques

Ready to Put Theory into Practice?

Review our aerodynamic CG calculation docs and pre-flight maiden checklist before taking to the skies.

Chat with Expert Pilot